Guidance

Registered building inspectors

Find out the classes of building inspectors, the competencies needed and how to register as a building inspector in England and Wales.

From:
Health and Safety Executive
Published
5 October 2023
Last updated
9 May 2024 — See all updates

Applies to England and Wales

Role of a building inspector

Registered building inspectors carry out regulated building control activities, which are:

  • assessing plans
  • inspections
  • giving advice to building control bodies that carry out regulated functions

After April 2024, if you intend to carry out any of these activities in England or Wales, you must be registered as a building inspector. After this date, if you are not registered it is a criminal offence to work as a building inspector.

Building control bodies

Registered building inspectors (RBIs) work for building control bodies, either as employees or contractors. Building control bodies are:

  • the Building Safety Regulator (BSR)
  • local authorities
  • registered building control approvers

Before you apply to register as a building inspector

You will need to decide:

  • the building types you are competent to work on
  • the registration class you should apply for
  • if you are competent to assess plans or carry out inspections, or both

To help you decide, you should read the building inspector competence framework for the country you are applying to work in:

The competence framework sets out the skills, knowledge and qualifications required for your registration application.

To apply to register as a class 2, 3 or 4 building inspector, you will need to complete, or be enrolled on, an independent competency assessment. If you apply to register without being assessed, you will be registered as a class 1 building inspector and can only work under supervision.

Building types 

To apply to register as a building inspector, you will need to decide which types of building you are competent to work on. There are: 

  • standard and non-standard buildings 
  • 8 different building categories

Standard buildings    

A standard build is designed and constructed from common industry recognised standards and codes.

Non-standard buildings   

A non-standard build are buildings that include anything outside of common construction techniques in England or Wales. They do not follow industry recognised design principles set out in relevant building guidance codes, such as:    

Non-standard building work can include:    

  • difficult ground conditions   
  • buildings with unusual occupancies or high levels of complexity, for example shopping centres occupied by shoppers and workers, conference centres and hospitals     
  • very large or very tall buildings and large timber buildings     
  • some buildings that incorporate modern construction methods     

Before a building project starts, building control bodies should identify if a building is non-standard, due to being:     

  • very large     
  • very tall     
  • large timber buildings

Building categories

The 8 building categories you can register to work on are: 

  • category A, a residential dwelling house for a single household, less than 7.5 metres in height 
  • category B, residential flats and dwelling houses, less than 11 metres in height 
  • category C, residential flats and dwelling houses, 11m or more but less than 18m in height 
  • category D, all building types and uses, less than 7.5 metres in height, excluding non-standard buildings  
  • category E, all building types, 7.5 metres or more but less than 11 metres in height, excluding non-standard buildings 
  • category F, all building types 11 metres or more but less than 18 metres in height 
  • category G, all building types, including standard and non-standard but excluding higher-risk, with no height limit 
  • category H, all building types, including higher-risk

Registration classes 

To apply to register as a building inspector, you’ll need to decide which registration class you are competent to apply for. There are 4 classes of RBI.

Class 1 

Must only work under supervision. You do not have to complete a competency assessment to register as a class 1 building inspector. This class is suitable for anyone new to the profession who is undergoing training. 

Class 2 

Can work unsupervised on building categories they are registered to work on, which may include: 

  • category A 
  • category B 
  • category C 
  • category D  
  • category E 
  • category F  

Class 3 

Can work unsupervised on building categories they are registered to work on, which may include category A to F buildings and: 

  • category G 
  • category H 

Class 4 technical manager 

Technical managers are class 2 or class 3 building inspectors with additional responsibilities for the technical management of teams and processes. 

A class 2 building inspector, who is also a class 4 technical manager, cannot carry out any class 3 activities unless supervised. 

Someone who is not a registered building inspector can administratively manage a building control team, but not on technical matters.

Competency assessment

To apply to register as a class 2, 3 or 4 building inspector, you must complete a competency assessment from an approved scheme.

You can get a competency assessment by contacting one of the providers of the approved schemes:

The assessment evaluates your skills, knowledge, experience and behaviours against the relevant building inspector competence framework:

As part of the assessment you will need to submit a portfolio of your work and pass an exam or an interview. You must be re-assessed at least every 4 years.

After you complete your assessment you will receive a certificate number. You will need to provide the number when you register as proof of your assessment.

Competency assessment extension period

From 6 April to 6 July 2024 experienced building inspectors in England can complete their competency assessment and upgrade their registration.

If you are a trainee registering for class 1, you can continue to work in class 1 under supervision.

If you are eligible, the scope of your registration will be temporarily extended to the class of RBI for which you are undertaking a competency assessment.

Extension period eligibility

If you have not completed your competency assessment to register as a class 2 or 3 RBI (and 4, if applicable), you can continue to work if you meet all of the following criteria:

  • you are an existing building control professional
  • you are registered as a class 1 RBI by 6 April 2024
  • you are enrolled in, and in the process of having your competency assessed through, one of the BSR approved competency assessment schemes by 6 April 2024
  • a scheme provider has not told you that you have not passed your competency assessment for a second time

If a scheme provider tells you that you have not passed your assessment for a second time before 6 July, you must notify BSR. The temporary extension to the scope of your registration will end and you will only be able to work as a class 1, under supervision.

You must pass your assessment and upgrade your class by 6 July 2024 to continue working on class 2 and 3 projects. If you do not, you cannot continue to work on regulated building control activities.

After passing your competency assessment

Once you have successfully passed your competency assessment and received your certificate number, contact BSR to upgrade your registration. You will not be charged for this.

Applying to register as a building inspector

You can apply to register as a building inspector online.

Registrations will usually be valid for 4 years, unless varied, suspended or cancelled by BSR.  

If you registered before 6 April 2024, the 4 years begin from 6 April 2024.

Information you will need

To complete the registration, you will need to provide:

  • your name, date of birth and contact details
  • your National Insurance number to cross-check with your competency assessment
  • the building inspector class you want to register as
  • the categories of buildings you are competent to work on
  • details of your independent competency assessment, if you have want to register as a class 2, 3 or 4 building inspector
  • membership details of relevant professional bodies, if you have any
  • your employment status

Code of conduct

As part of your application to register, BSR will ask you to confirm that you comply with the code of conduct for registered building inspectors in the countries you are registered in.

Read the:

If you register for both England and Wales you will have to confirm that you comply with both codes of conduct.

Payment information

You will need to provide your credit or debit card details to pay the £336 registration charge - whether you register for one country or both.  

In addition to the registration charge, from the first anniversary of your registration you will need to pay an annual maintenance charge of £216.

You can find out more about the:

Application decision

BSR will tell you if your application is approved, approved subject to conditions, or rejected. 

In cases where the application is subject to conditions or rejected, BSR will tell you why.

You can challenge the decision. The process is different depending on whether you applied to register in England, Wales, or both.

To request a review of an English registration decision, you should contact BSR within 21 days of receiving your decision. You will need to tell us: 

  • your application reference  
  • the date the decision was made  
  • the reasons why you want us to review the decision  
  • any further information that may be relevant but was not available at the time of the original decision

If at the end of a review the decision is upheld, you can appeal to a First-tier Tribunal.

To appeal a Welsh registration decision, you can lodge an appeal with the Magistrates’ Court within 21 days of receiving the decision. This time limit can be extended with the written agreement of BSR.

After you register

After registration, you must maintain and develop your competence as a building inspector. This means you must:

  • abide by the code of conduct
  • continue to develop your skills and knowledge, this can be evidenced by maintaining an up-to-date portfolio of work
  • complete an independent competency assessment at least every 4 years
  • have appropriate supervision if you carry out work outside of your current registration class or competence

Progression

If you want to expand the range of work you are registered to do, you can:

  • develop your competence within your class under the appropriate supervision, to work across more building categories
  • pass an independent competency assessment to change your registration class

Supervision

When you work under supervision, it means that your work is overseen by a suitably competent RBI. A suitably competent RBI is someone of a relevant registration class who can carry out the work. 

Working under supervision: class 1 trainee building inspector

Work you could be supervised on, as a class 1 trainee building inspector, includes:

  • checking plans for compliance with building regulations where the plans are re-checked by a suitably competent class 2, 3 or 4 RBI
  • inspecting building work alongside a suitably competent class 2, 3 or 4 RBI, this will include discussing findings and having your decision-making overseen
  • gathering information to show a suitably competent class 2, 3 or 4 RBI for a decision on compliance

Working under supervision: class 2 registered building inspectors

Work you could be supervised on, as a class 2 building inspector, includes:   

  • checking plans and specifications for compliance with a suitably competent RBI against building regulations for class 2 work, which you are not registered for
  • checking plans and specifications for class 3 work where the plans are re-checked by a suitably competent class 3 RBI
  • inspecting building work alongside a suitably competent class 2 or 3 RBI, this will include discussing findings and having your decision-making overseen
  • gathering information to show a suitably competent RBI of a class 2 for which you are not competent, or class 3 for a decision on compliance

Working under supervision should form part of your professional learning and development.

You should keep evidence of your work, including work done under supervision, in your portfolio.

Supervising registered building inspectors

If you supervise the work of another building inspector, you are responsible for the work and must make sure it is done correctly.

You can only supervise work you are competent to carry out.

You can find out more about your responsibilities in the relevant code of conduct. 

Finding a supervisor

The building control body you work for must provide you with a supervisor. This is the same whether you are employed or self-employed.

The building control body must have a process in place to make sure all supervised work is up to standard.

Public register

There are 2 public registers of building inspectors, one for England and one for Wales.

Search the:

Your details will appear on one or both registers depending on which countries you are registered to work in.

The registers allow people to verify who is a registered building inspector and the work they are registered to do.

The registers show:

  • your name
  • if you are employed by a building control body, your employer’s name and address
  • if you are self-employed, the business address you submitted in your application
  • your registration class
  • which categories of buildings you are registered to work on
  • the start and end date of your registration
  • details of any conditions attached to your registration, such as limits on the type of work you can do

Removal from the register

Your details can be removed from the register if you:

  • ask to be taken off because you no longer want to work as a building inspector
  • do not renew your registration before it expires
  • are found to be in breach of your responsibilities and your registration is suspended or cancelled

If your details are removed from the register, BSR will continue to keep your details in line with our data retention policy.

If you want to take a career break from working as a registered building inspector, you can ask for your details not to be publicly available on the register.

To ask to be removed from the register, call BSR on 0300 790 6787.

Making changes to your registration

You must notify BSR within 28 days of any changes relevant to your registration, such as:

  • your name
  • your home address or contact address
  • your contact details
  • your employer and employer details
  • if you want to change your registration class or categories of work
  • any relevant criminal convictions
  • if you are sanctioned by a professional body
  • if you are declared bankrupt, or subject to other action as detailed in the code of conduct for registered building inspectors
  • if you no longer wish to be on the register

If you are changing class, only notify BSR once you have your competence assessment certificate, or it will be rejected.

You can read more about the rules of registration for England in annex 3 of the code of conduct for registered building inspectors (hse.gov.uk).

To change your details, call BSR on 0300 790 6787.

Monday to Friday, 8:30am to 5pm (except Wednesdays when we are open from 10am to 5pm, and public holidays when we are closed). Normal call charges will apply.

BSR will ask for your email address and send you a form and a ShareFile link with instructions on how to upload your changes.

You do not need to re-register after making a change unless your registration is due to expire.

Professional misconduct and complaints

If you are found to be guilty of professional misconduct you could face sanctions. A breach of the code of conduct may be used as evidence of professional misconduct.

You are committing an offence and could be prosecuted if you:

  • carry out work that you are not registered to do without supervision
  • work as a building inspector after April 2024 without being registered
Published 5 October 2023
Last updated 9 May 2024 + show all updates

  1. Guidance on building types, such as standard and non-standard buildings added.

  2. Guidance on building types, such as standard and non-standard buildings added.

  3. Competency assessment extension period guidance added. From 6 April to 6 July 2024 experienced building inspectors in England can complete their competency assessment and upgrade their registration. Guidance on extension period eligibility has also been added.

  4. Guidance additions for registering as a building inspector for Wales. This includes links to the code of conduct, competency framework, charging scheme and reviews for Wales. Annual maintenance charge has also been added to the guidance.

  5. First published.

Contents

Related content